We made this carved university seal for the Honors College at Washington Adventist University in Takoma Park, Maryland. Bradford Haas, Director of the Honors College, contacted us about turning the college seal into a permanent sign for the entrance to their office in H.M.S. Richards Hall. In fact, it was important to the college that a local Maryland shop make the seal. The finished sign stands 42 inches tall, about 31.5 inches wide and 2 inches thick, with 23 karat gold leaf on the lettering, the bell and the stars.
Redrawing the Artwork for a Carved University Seal
The college first designed its seal for small, flat uses like letterhead, folders, mugs and medallions. Brad knew the design would need some interpretation to work as a large, dimensional sign. After all, at 42 inches, flaws you would never notice on a coffee mug become obvious. Likewise, fine details that print well are often too small to carve. So, before anything went to the router, Travis Brandon redrew the artwork and made a series of small but important corrections.
Small Corrections That Make a Big Difference
- Balanced the arch. The top of the original college seal arch was lopsided, with one shoulder sitting higher and flatter than the other. On a sign this size, the eye would catch it right away.
- Simplified the stars. The seven-pointed stars between the words had tiny black triangles inside them, far too small to carve. Instead, the stars are solid gold leaf, and we added the triangle detail by hand on top of the gold.
- Cleaned up the red borders. We redrew the red bands around the edge and the inner arch so each one reads as a clean raised edge.
- Rounded the pomegranate seeds. The original drawing shows the seeds as flat circles. On the finished honors seal, each seed is round, so the fruit looks real.
- Kept the bell flat. We apply the red ribbon, WAU and the Roman numerals to the face of the bell by hand. A flat face lets that artwork sit cleanly, and it also keeps the straight edges that every other element on the sign shares.
Choosing the Finishes
We also helped settle the finishes for the carved university seal. At first, the college asked about metallic gold paint on the sides of the sign. However, metallic paint never looks like the real thing, and gold sides would pull attention away from the face. In the end, all of the gold on the face of the honors seal is genuine gold leaf, the sides are black, and the smooth recessed background lets the raised elements stand out.
Carving and Gilding the Seal
The carved university seal is made from HDU (high-density urethane), with raised lettering, borders and artwork over a smooth recessed background. Next, we gilded every letter of the Latin motto, the bell and each star with 23 karat gold leaf. You can read more about the craft in our gilding guide. Finally, we painted the pomegranate a glossy red, so the rounded seeds catch natural highlights from the room’s lighting.
What the Seal Means
Every symbol on this carved university seal carries meaning. For example, the arch shape is a nod to WAU’s “Gateway to Service.” Meanwhile, the Latin motto, Ut Aliis Meliores Serviamus, roughly translates to “so that others are better served.” The bell symbolizes creativity, and its red ribbon carries MMIV (2004), the year Honors education began at WAU. Similarly, the pomegranate stands for unity in diversity: one fruit, many seeds.
Installing the Carved University Seal
We brought the sign over from our shop in Edgewater and installed it on May 2, 2024, in time for an important college event the next day. Since then, the carved university seal has become part of the Honors College’s 20th anniversary celebration, and the university wrote about the unveiling in their article, Honors College’s 20th Anniversary: Unveiling the Honors Seal.
Master gilder Brendon Brandon founded Designs & Signs in 1976. For almost fifty years, we have made carved signs, seals and gold leaf signs for restaurants, shops, parks, boats, monuments, schools and historic buildings throughout Washington, DC, Maryland, Virginia, Delaware, Pennsylvania and New Jersey.
More Carved and Gold Leaf Signs
- Routed HDU Signs
- Routed HDU Signs for Westbard Mews
- Routed Logo for Kiefer Family Orthodontics
- Carved Quarterboards with Gold Leaf: Remedy
- Dimensional Letters
Contact Designs & Signs
The quickest way to get started on your project is to send us an email.
We can also be reached by phone at (410) 798-5115.





