Every boat with U.S. Coast Guard documentation has to carry its official number inside the hull. In January 2022, Andrew emailed us about a carved boat documentation board. It had to read “NO. 989299,” and every character had to be at least 3 inches tall. We have made quite a few of these boards over the years, so we knew the format well. A week later the board was ready, and Andrew picked it up at our shop in Edgewater.
Boat Documentation Board Requirements
A documented boat does not show its official number on the outside of the hull. The outside carries the boat’s name and hailing port instead. The number goes inside, and 46 CFR 67.121 spells out the rules:
- Put the abbreviation “NO.” in front of the official number.
- Use block-type Arabic numerals at least 3 inches high.
- Place the number on a clearly visible interior structural part of the hull.
- Fix it permanently, so anyone could tell if someone altered, removed or replaced it.
- If you use a separate plate, fasten it so that removing it would normally scar or damage the hull around it.
A carved boat documentation board meets every point. The carved numbers sit right in the wood, so they cannot peel, fade or rub off the way stick-on numbers can.
A Teak or Mahogany Documentation Board
We make documentation boards from teak or mahogany, the same woods we use for our carved quarterboards. Andrew’s board is teak. He left it natural, with no paint, so the numbers read by the shadows in each carved character. A natural board looks right at home in a cabin full of wood trim. We can also paint or gild the numbers if you want them to stand out.
Ordering Your Boat Documentation Board
To get started, send us your official number exactly as it appears on your Certificate of Documentation, and tell us whether you prefer teak or mahogany. We add “NO.” in front of the number and size the characters to meet the 3-inch minimum. Once we finish the board, it is ready to install on a bulkhead or other structural part of the hull where anyone aboard can see it.
More Carved Boat Signs
- Browse our carved quarterboards
- Carved Quarterboard: Clover Crest Dairy
- Mahogany Boat Sign: Gold Leaf and a Marlin for reKUPPERation
- Carved University Seal in Gold Leaf for WAU Honors College
Contact Designs & Signs
The quickest way to get started on your project is to send us an email.
We can also be reached by phone at (410) 798-5115.


